Why does my Alpha Link not remember SRC settings?
There is a problem in the software where the Alpha Link does not remember the SRC settings for the digital input pairs 1/2, 3/4, 5/6, 7/8. When the system is powered down and back up again the SRCs will be in bypass no matter which settings you have selected in the configuration menu. To switch SRCs in you will need to set them in the configuration settings of the Alpha Link and then press the sample rate and clock buttons to resume normal operation of the system without powering off. This will need to be carried out each time the unit is powered down and back up again. The bug should be fixed in V2.5 release of firmware.